OSM 100 is a ready-to-use corrosion inhibitor based on a sodium hydroxide solution.
5L, 20L
Reagents for steam and hot water boilers
Transparent colorless liquid
Faint specific odor
Sodium hydroxide
0,95 ÷ 1,45
8,5 ÷ 13,5
OSM 100 is a liquid alkaline corrosion inhibitor. It is intended for the corrective treatment of steam boilers where demineralized or reverse osmosis water is used as feed water, as well as in the case of a high percentage of condensate return (over 90%).
Corrects the pH and alkalinity of feed and boiler water. The maximum boiler water temperature is +300 °C, the maximum pressure is 60 atm. It can be used to neutralize acidic wastewater, maintain the required pH level in recirculating cooling and heating systems.
OSM 100 is a sodium hydroxide solution-based corrosion inhibitor that is ready to use.
The product has the ability to neutralize carbon dioxide, increase pH and alkalinity to the limits that cause the least corrosion.
Minimizes corrosion processes and helps to create a uniform magnetic protective film on the metal surface.
The dosage of the inhibitor depends on the quality of the feed water, the operating characteristics of the steam boiler, the required pH level, and alkalinity. OSM 100 is a ready-to-use product, dosed in concentrated form using a dosing pump.
The recommended injection point is after the reverse osmosis system is installed or at the bottom of the feed tank or deaerator. If necessary, the product can be diluted with additional or feed water up to 5-10%. Dosing control is ensured by maintaining the required pH and alkalinity in the boiler water. Other parameters are controlled in accordance with the requirements of the operating mode card.
